River Falls, WI · East Twin Cities Metro Mon–Fri 8a–5p · Sat by appt Owner-operated · Veteran-friendly (715) 307-8302

Utility Room Coatings · Shoreview, MN · Est. 2003

Utility Room Coatings in Shoreview, Minnesota.

Shoreview is a Ramsey County suburb between I-694 and Highway 96, north of Roseville and west of Vadnais Heights. It is named for what it is built around: Snail Lake, Turtle Lake, Island Lake, Lake Owasso and the wetlands of the Rice Creek chain. We install polyurea + polyaspartic floor coatings for Shoreview homeowners: diamond-ground prep, custom flake colors, 1–2 day install, written 15-year warranty. Mostly 1960s through 1980s. Shoreview built out later than the first-ring suburbs south of I-694, so its ramblers, split-levels and two-story homes run a decade or two newer than Roseville's, with 1990s and 2000s infill and townhomes on the north and east edges.

Text Dave · (715) 307-8302 See Pricing

Utility Room Coatings in Shoreview

What an install looks like in Shoreview.

Shoreview is a water town with suburban housing on it, and that is the fact that matters for a slab. The city is threaded with lakes, ponds and wetland, Snail, Turtle, Island, Owasso, Sucker and the Rice Creek chain, and a large share of the housing sits within a few hundred feet of standing water. Lower-level and walkout slabs on those lots pass more moisture than a slab on high ground, and a coating put over a wet slab lifts. So the moisture test comes before the quote here, not after the first blister. The housing itself is straightforward: 1960s through 1980s ramblers, split-levels and two-story homes with attached two-car garages, plus 1990s and 2000s builds with three-car garages on the edges. Split-levels bring the other Shoreview pattern, the tuck-under garage, where the slab is partly below grade and shares a wall with living space.

Utility Room Coatings specifically in Shoreview

Shoreview mudrooms take lake sand in the summer and road salt in the winter, and the combination is harder on a bare slab than either alone because the sand grinds the salt into the surface. Polyurea shrugs off both and cleans with a mop. The room is normally coated alongside the garage or lower level it opens onto.

Neighborhoods we work in

  • Snail Lake
  • Turtle Lake
  • Island Lake
  • Lake Owasso shoreline
  • Hodgson Road corridor
  • Rice Creek
  • Highway 96 corridor
100SQ FT Min job size Or bundle with larger work
FewHRS Typical install Most rooms done in an afternoon
15YR Written warranty Same as garage + basement
5.0★ Google rating From real homeowners

Why we don't install epoxy in Shoreview

Why a coating beats concrete paint or VCT in a utility room.

Most utility rooms have one of three floor finishes: bare concrete, concrete paint (peeling within a year or two), or vinyl tile (lifting at edges from moisture). All three fail in the same conditions utility rooms see daily: water, detergent, dropped tools, road salt. A polyurea coating ends the cycle: it bonds mechanically into the concrete, doesn't peel, doesn't lift, doesn't soak up spills.

Concrete Paint / DIY Floor Kit What's typically installed
  • Sits on top of the slab. Concrete paint is a surface coating with a chemical bond. No diamond grinding, no mechanical bond, no longevity.
  • Peels in traffic areas within months. The cycle: paint, looks great for 6 months, traffic patterns peel through to bare concrete, repaint, repeat. Mudrooms see this fastest because of road salt and water.
  • Soaks up detergent + bleach spills. Painted floors stain. Bleach spots show up white. Detergent residue dulls the surface.
  • VCT lifts at the edges. Moisture from the slab gets under vinyl tile and the corners curl. Common in basement laundry rooms.
  • You're re-doing it every 2-3 years. The math doesn't work over a 10-year window; repaint cost + labor exceeds a single polyurea install.
Polyurea + Polyaspartic What we install instead
  • Bonded into the slab. Diamond-ground prep + polyurea basecoat creates a mechanical bond. The coating is fused into the concrete pores, not sitting on top.
  • 15-year coating, no re-application. Same warranty as our garage and basement installs. Done in a few hours, lasts the next 15 years.
  • Wipes clean. Stains don't stick. The polyaspartic topcoat is non-porous. Detergent, bleach, mud, dog water, oil drips: all wipe up clean.
  • Seamless surface. No grout lines, no tile edges, no seams where dirt or water collects.
  • Bundled, it's cheap. $400-800 added cost when bundled with a garage install vs $1,500+ standalone. Most homeowners bundle for the math.

Bottom line: utility rooms see the same conditions as a garage or basement, just at smaller scale. Same coating system applies. Same warranty. The only thing that changes is the room size and (often) the install duration; most utility rooms are done in an afternoon.

Shoreview Pricing

Utility Room Coatings cost in Shoreview, MN: $7–9 per sq ft.

Standalone pricing is below. Most homeowners save 30-50% by bundling utility rooms with a larger garage or basement install; equipment is already on-site, so the marginal cost is materials + 2-4 hours of crew time. Mention any adjacent utility spaces at quote time.

Standalone Small

100 sq ft

small laundry or mudroom

From $1,000 to $1,500
  • Polyurea flake or solid color
  • Diamond-ground prep included
  • Done in an afternoon
  • 15-year warranty
Get my number
Bundle Add-On

Add-on to garage/basement

100-200 sq ft

From $400 to $1,200
  • Same crew, same day
  • Significant savings vs standalone
  • Mention at on-site quote
  • 15-year warranty
Get my number
Larger Standalone

300+ sq ft

large workshop or hobby room

From $1,800 to $2,700
  • Polyurea flake or solid color
  • Bundle pricing on adjacent rooms
  • Done in 1 day
  • 15-year warranty
Get my number

Standalone minimum is ~100 sq ft (jobs smaller than that don't pencil). For utility rooms attached to a larger project, there's no real minimum. We'll add a 30 sq ft mechanical closet to a basement install for the cost of materials. Send four photos and Dave will quote bundle pricing same-day.

The 6-step install

How we install your floor in Shoreview.

Same checklist on every floor. The reason our coatings still look new at year ten when the cheap stuff peeled in year two.

  1. 01

    Diamond grinding

    Same diamond-ground prep as our garage and basement installs. Removes old paint, sealers, contamination, and the weak top layer of concrete. HEPA-vacuum dust collection so we can prep an interior space without dust escaping into the rest of the house.
  2. 02

    Crack & spalling repair

    Older utility-room slabs often have spalling, paint residue, or cracks from years of foot traffic + minor leaks. Cracks get flexible polyurea filler, spalled areas get patched with polymer-modified compound. Routine.
  3. 03

    Polyurea basecoat

    Same polyurea basecoat as larger jobs. Full mil thickness, structural layer of the system, fast-cure for short install windows.
  4. 04

    Flake or solid-color coat

    Decorative flake (your color choice) or solid pigment color. Anti-slip aggregate available for laundry rooms, dog wash stations, or other surfaces likely to see standing water.
  5. 05

    Polyaspartic UV topcoat

    UV-stable polyaspartic clear topcoat seals the system. Resists detergents, bleach, water, oil, and household chemicals. Wipes clean with a mop. Walk on it in 24 hours.
  6. 06

    Same 15-year warranty

    Same written 15-year warranty as garage and basement installs. Lifetime UV-fade warranty on the topcoat. Real warranty document handed to you at install completion.

Shoreview questions

Common questions for Shoreview homeowners.

We back onto a wetland. Can our lower level still be coated?
Usually yes, and the test tells us which system it takes. A calcium chloride moisture test measures how much water the slab is passing. A low reading takes standard polyurea. A high reading takes a vapor-mitigation primer underneath first, which is what keeps the coating attached to a slab that is going to stay damp. Coating a wet slab without that step is how coatings near water fail.
Is a tuck-under garage different from a regular attached one?
The coating is the same, the slab is not. A tuck-under floor is partly below grade, so it stays colder longer in spring and is more likely to carry moisture up from the ground than a garage poured on grade. We check the temperature of the slab itself before coating, and we test tuck-under floors for moisture the same way we test a basement.
How old are most Shoreview slabs?
Most are 1960s to 1980s, so forty to sixty years. That is a good age to coat. The concrete is fully cured and settled, and what it has picked up along the way, hairline cracking, a spalled edge, an old coat of paint, comes off or gets filled during prep.
How much does a laundry room or utility room floor coating cost?
Standalone, a 100-200 sq ft utility room runs $1,000-$1,800 fully installed. Bundled with a garage or basement install, that drops to $400-$1,200 because equipment and crew are already on-site. Most homeowners save 30-50% by bundling.
Can you do just a small laundry room (100 sq ft)?
Yes. 100 sq ft is our standalone minimum. Smaller than that doesn't pencil for a standalone job. But if you're booking a garage, basement, or mudroom install at the same time, we'll add a 30 sq ft mechanical closet or pantry for the cost of materials only.
Is the floor really better than concrete paint?
By 15× on lifespan. Concrete paint is a surface coating with chemical bond that peels in months under traffic. Polyurea is mechanically bonded into the slab via diamond grinding, doesn't peel, lasts 15+ years. The math: 5-7 paint re-applications over 15 years vs one polyurea install. Polyurea wins on lifecycle cost.
Can you coat a basement laundry room with potential moisture?
Yes. Same moisture-tolerant polyurea system we use for full basement installs. We test the slab for moisture (MVER) before quoting, so we know up-front whether it needs a moisture-mitigation primer underneath. Most basement laundry rooms don't, but we test to be sure.
Will it handle bleach, detergent, and washing machine overflow?
Yes. The polyaspartic topcoat is chemical-resistant to household concentrations of bleach, detergent, and laundry chemicals. Standing water from washing machine overflow doesn't damage the coating; just wipe it up. Far better than VCT (which lifts) or paint (which stains).
Can the floor be slip-resistant for a dog wash or wet area?
Yes. Anti-slip aggregate is broadcast into the topcoat for any utility room expected to see standing water (dog wash stations, mudrooms with frequent wet feet, laundry rooms with overflow risk). Texture level is dialed at the on-site quote.
How long does a utility room install take?
A 100-200 sq ft room runs about 3-4 hours including drying time between coats. Walk on it the next morning, full use within 48 hours. Most homeowners don't need to plan around the install; we work around your schedule.
Will it look like a garage floor or more like living space?
Your call. Flake colors range from "industrial" (gray + black flake) to "living-grade" (warm browns and tans, light cream blends). Mudroom installs typically use warmer/lighter colors to feel like part of the lived-in house; laundry rooms often go neutral; workshops go industrial. Dave brings physical color samples to every on-site quote.
What's the warranty on a smaller utility room install?
Same written 15-year warranty as our garage and basement installs. There's no "smaller job, smaller warranty" thing. Lifetime UV-fade warranty on the topcoat. Real warranty document handed to you at install completion.
Can I bundle multiple utility rooms together?
Yes. Bundle pricing scales with each additional room added to a single visit. Garage + laundry + mudroom on the same day runs cheaper per room than three separate installs. Mention every adjacent utility space at the on-site quote and Dave will price the package.

More in Shoreview

All the services we offer in Shoreview, MN.

Whatever the slab (garage, basement, patio, mudroom, commercial) gets the same diamond-ground prep, same polyurea + polyaspartic system, same 15-year warranty. Bundle pricing if you book multiple rooms in one visit.

Utility Room Coatings elsewhere

Utility Room Coatings in nearby cities.

Same diamond-ground prep, same polyurea + polyaspartic system, same 15-year warranty across our entire service area. If you're outside {city}, here's where else we install.

← See Utility Room Coatings details and full service area

Get a quote

Ready for a utility room coatings install in Shoreview?

Send four photos of your slab and we'll text back a real Shoreview number same-day. No salesperson, no quote-bot, no follow-up calls.

(715) 307-8302 Text Dave · Fastest reply
  • Free on-site measurement
  • Written 15-year warranty
FREE QUOTE

Tell us about your slab.

By submitting you agree to be contacted about your project. We don't sell your info, ever.

Text Dave (fastest) Call