Skip to main content
Hammond, WI · River Falls Metro Mon–Fri 8a–5p · Sat by appt Owner-operated · Veteran-friendly

Basement Floor Coatings · Hammond, WI · Est. 2003

Basement Floor Coatings in Hammond, Wisconsin.

Hammond is a small St. Croix County village on Highway 12 / I-94, between Roberts and Baldwin. About 30 minutes east of River Falls. We install polyurea + polyaspartic floor coatings for Hammond homeowners — diamond-ground prep, custom flake colors, 1–2 day install, written 15-year warranty. Mostly mid-century to 1980s housing in the village core, with some historic 1900s homes downtown and newer post-2000 builds along the Highway 12 / I-94 corridor.

Text Dave · 715-307-8302 See Pricing

Basement Floor Coatings in Hammond

What an install looks like in Hammond.

Hammond is a small Highway 12 / I-94 corridor village. The downtown core has older mid-century and a few 1900s homes; the I-94 corridor edge has newer residential and small commercial development. We batch Hammond installs with Roberts, Baldwin, and Woodville for corridor efficiency.

Basement Floor Coatings specifically in Hammond

Hammond basements test cleanly for moisture in most cases. Most are mid-century slabs that go to a standard polyurea install. Older downtown homes occasionally need vapor mitigation primer.

Neighborhoods we work in

  • Downtown / Davis Street
  • Highway 12 corridor
  • Hammond Heights
  • South Hammond
  • I-94 commercial edge
  • North Hammond
20+ Years installing Concrete coatings since 2003
1DAY Typical install Livable space the next day
15YR Written warranty + moisture barrier rating
5.0★ Google rating From real homeowners

Why we don't install epoxy in Hammond

Why epoxy fails in basements — and what we install instead.

Basements are the worst environment for an epoxy floor coating. Three reasons compound: moisture transmits through below-grade slabs constantly (epoxy is moisture-intolerant and delaminates), VOCs are a real concern in enclosed basement spaces with limited ventilation (epoxy off-gasses for days), and basements settle and shift over decades of freeze-thaw (rigid epoxy cracks). Polyurea fixes all three. Here's the side-by-side:

Epoxy / DIY Basement Sealers What box stores sell
  • Delaminates from moisture. Below-grade slabs transmit ground moisture upward through the concrete. Epoxy bonds chemically — once moisture vapor gets between the coating and the slab, the bond fails and the floor lifts.
  • Off-gasses VOCs for days. Solvent-borne epoxy is what you smell when an installer leaves. In an enclosed basement that smell hangs around — unpleasant and not great for the lungs.
  • Cracks across slab settlement. Basement floors shift and settle for decades. Rigid epoxy cracks along the same fault lines as the concrete underneath.
  • Needs a week to cure. Basement out of service. Air out the smell. Hope no humidity gets in. Wait.
  • DIY kits are housepaint. Box-store basement floor "epoxy" kits ($150-300 for an 800 sq ft basement) are essentially porch paint with grit. They peel within 1-2 winters.
Polyurea + Polyaspartic What we install
  • Moisture-tolerant. Polyurea is rated for higher concrete moisture levels than epoxy. We test the slab first; if it's high we add a moisture-mitigation primer. Either way, the system handles below-grade conditions epoxy can't.
  • Very low VOC. Our polyurea systems are essentially odorless during install and after cure. Important for an enclosed basement space, especially if anyone in the household has respiratory sensitivity.
  • Flexible. Moves with the slab. Polyurea is roughly 100% more flexible than epoxy. When your basement floor settles or shifts, the coating moves with it.
  • Cures in 24-48 hours. Walk on it the next day, livable space the day after. Done in a weekend, not a week.
  • Eliminates concrete dust. Bare basement concrete sheds fine dust constantly — that's what tracks upstairs and settles on everything. Sealing the slab kills the dust source.

If you've been searching for "basement floor sealer" or "basement epoxy," polyurea is what those terms should resolve to. Same flake colors. Same approximate price as a contractor-grade epoxy install. Vastly better suited to a basement.

Hammond Pricing

Basement Floor Coatings cost in Hammond, WI: $7–9 per sq ft.

Pricing is upfront because you should know if we're in your budget before we drive out. Every number includes diamond-ground prep, MVER moisture testing, polyurea + polyaspartic system, your color choice, and the 15-year warranty. The line items below are typical Wisconsin basements. Final number depends on slab condition + any moisture mitigation needed.

Smaller Basement

500 sq ft

small finished area

From $3,500 to $4,500
  • Polyurea + polyaspartic flake system
  • Light color blend (brightens basement)
  • MVER moisture test included
  • Done in 1 day
Get my number
Most Common

800 sq ft

typical finished basement

From $5,600 to $7,200
  • Polyurea + polyaspartic flake system
  • Custom color blend
  • Crack & joint repair included
  • Done in 1 day
Get my number
Larger / Walk-out

1,200+ sq ft

large or walk-out basement

From $8,400 to $10,800
  • Polyurea + polyaspartic flake system
  • Bundle pricing on adjacent rooms
  • Phased install possible
  • Done in 1-2 days
Get my number

If your slab tests high on moisture (~15% of basements do), add ~$2 / sq ft for a moisture-mitigation primer. Send four photos and Dave will text back a real number same-day. No quote-bot, no sales rep, no follow-up calls.

The 6-step install

How we install your floor in Hammond.

Same checklist on every floor. The reason our coatings still look new at year ten when the cheap stuff peeled in year two.

  1. 01

    Diamond grinding + moisture test

    Industrial diamond-tooled grinders open the concrete pores and remove old paint, sealers, or surface contaminants. Concurrently, an MVER moisture test runs to confirm the slab is dry enough for a standard install (or whether mitigation is needed first).
  2. 02

    Crack & joint repair

    Every visible crack and control joint gets filled with flexible polyurea joint filler. Below-grade slabs settle over decades; flexible filler moves with them instead of fracturing.
  3. 03

    Polyurea basecoat (moisture-rated)

    Moisture-tolerant polyurea basecoat goes down at full mil thickness. This is the layer that handles ground moisture transmission and provides flexibility through slab movement.
  4. 04

    Full flake broadcast

    Decorative flake (your custom color blend) is broadcast to refusal across the wet basecoat, then scraped flat once cured. Lighter blends brighten naturally dark basements; warmer blends create a finished-living-room feel.
  5. 05

    Polyaspartic UV topcoat

    UV-stable polyaspartic clear topcoat seals the system. Resistant to detergents, bleach, water, household chemicals, and the spills basements actually see. Wipes clean with a mop.
  6. 06

    Written 15-year warranty

    15-year written warranty against chip, crack, and peel under normal residential use. Lifetime UV-fade warranty on the topcoat. Real warranty document, not a marketing line.

Hammond questions

Common questions for Hammond homeowners.

Is Hammond too small to serve?
No — we batch Hammond with corridor neighbors (Roberts, Baldwin, Woodville). Same install quality and 15-year warranty as anywhere else.
How long is the drive from River Falls?
About 30 minutes east via Highway 12. Easy install territory.
Will a basement floor coating actually stop moisture problems?
It seals against moisture transmission through the slab, which is the source of musty basement smell and surface condensation. It does not fix water intrusion (cracks, broken drains, foundation leaks) — those are drainage issues that need fixing separately. We test the slab before coating; if it transmits too much moisture for a standard install, we add a mitigation primer. If you have visible standing water or active leaks, address that first; we can refer you to a foundation contractor.
How much does a basement floor coating cost?
A typical 800 sq ft finished basement runs $5,600-$7,200 fully installed in our standard polyurea flake system ($7-9 / sq ft). Smaller basements (500 sq ft) come in at $3,500-$4,500. Larger walk-outs (1,200+ sq ft) run $8,400-$10,800. If your slab needs moisture mitigation, add ~$2 / sq ft. The price is upfront on this page so you know if we're in your budget before requesting a quote.
Is polyurea better than epoxy for a basement floor?
Yes, dramatically — and the gap is bigger in basements than anywhere else. Polyurea handles moisture, low-VOC concerns, and slab settlement. Epoxy struggles on all three. Below-grade slabs transmit moisture upward; epoxy delaminates from that moisture. Epoxy off-gasses VOCs for days; polyurea is essentially odorless. Epoxy is rigid; basement slabs settle for decades. The chemistry has moved on, and it moved on hardest in basement applications.
Can I install a basement floor coating myself with a DIY kit?
You can. Box-store DIY kits run $150-300 for an 800 sq ft basement. The chemistry is essentially porch paint with decorative grit. Expect 1-2 winters before peeling, then a re-coat. The math doesn't work — by the third re-coat you've spent more than a single professional polyurea install that lasts 15+ years and includes moisture mitigation if needed.
How long does a basement coating take to install?
One day for prep + basecoat + flake + topcoat. Walk on it in 24 hours. Livable space (gym, playroom, etc.) in 48 hours. Larger basements (1,200+ sq ft) can run into a second day depending on layout, but most homeowners are back to using the space the weekend after install.
Will it look good in a finished basement?
Yes — basements are actually one of the best applications for the visual. Light flake blends brighten naturally dark basement spaces. Warm-tone blends (browns, tans) feel like finished-room flooring. Solid colors give a clean modern look. Dave brings physical color samples to every on-site quote because screens never show true color.
What about that musty basement smell — does coating fix it?
Often, yes. Musty smell typically comes from moisture transmitting through the concrete + microbial growth on the surface. Sealing the slab kills the moisture source and gives nothing for mold to grow on. If the smell persists after coating, the cause is somewhere else (HVAC, walls, insulation) and a coating won't fix it. Most homeowners notice the smell drop dramatically within a week of install.
Will the floor coating eliminate concrete dust?
Yes. Bare basement concrete sheds fine particulate continuously — that's what tracks upstairs on shoes and settles on stored items. Sealing the slab fills the concrete pores and stops the dust generation. This alone is worth the install for many homeowners.
Do you serve basements in older homes?
Yes. Older basement slabs are typical for our work — they often have spalling, paint, old sealers, or cracks. None of that is a problem; it's just included in the diamond-grinding + crack-repair prep. The system goes down on a clean substrate either way.
Is your 15-year warranty real?
Yes — written warranty document handed to you at install completion. Covers chip, crack, and peel under normal residential use. Separate lifetime UV-fade warranty on the topcoat. The warranty doesn't cover damage from abuse, neglect, or improper chemical exposure (bleach is fine; battery acid is not).

More in Hammond

All the floor coatings we install in Hammond, WI.

Whatever the slab — garage, basement, patio, mudroom, commercial — same diamond-ground prep, same polyurea + polyaspartic system, same 15-year warranty. Bundle pricing if you book multiple rooms in one visit.

Basement Floor Coatings elsewhere

Basement Floor Coatings in nearby cities.

Same diamond-ground prep, same polyurea + polyaspartic system, same 15-year warranty across our entire service area. If you're outside Hammond, here's where else we install.

← See Basement Floor Coatings details and full service area

Talk to Dave

Ready for a basement floor coatings install in Hammond?

Send Dave four photos of your slab — he'll text back a real Hammond number same-day. No salesperson, no quote-bot, no follow-up calls.

715-307-8302 Text Dave · Fastest reply
  • Free on-site measurement in Hammond
  • Written 15-year warranty
  • No subcontractors, no upsells
HAMMOND QUOTE

Tell Dave about your Hammond slab.

By submitting you agree to be contacted about your project. We don't sell your info, ever.

Text Dave (fastest) Call
This site uses cookies for analytics + ads attribution. Privacy · Cookies